IBM INFO PRINT 3000 - Manual (Page 205)

and then execute the Shutdown routine. A window appears stating that the
system is shutting down. A second window appears stating that the system is
being “rebooted”. At the completion of the reboot, the Printer Mode change is
in effect (the Duplex main Display Touch Screen window appears).
Note: No system power-off and power-on procedure is required.
10. To remove any forms still in the printer, see “Clearing the Forms Path” on
page 136.
11.
Load paper and assign the form for duplex operation (see “Loading Forms
(Duplex Mode)” on page 115).
12. Perform the Thread/Align Forms procedure (see page 152).
13. SELECT the Ready pushbutton.
For additional information, see “Chapter 8. Configuring the System” on page 217.
Chapter 6. Operator Responsibilities
173
|
|
|
|
|
|