Print while threading – IBM INFO PRINT 3000 User Manual
Page 192
8.
After you have visually verified that the Printer 1 alignment mark is aligned
correctly on Printer 2, SELECT the Mark is Aligned pushbutton on the
window.
At the Verification window, SELECT the OK pushbutton.
This informs the control unit that the alignment is complete.
Important
If your visual verification of alignment is incorrect, all following duplex
print jobs are printed with incorrect alignment between the front and back
of the pages.
9.
If a postprocessing device is installed and not threaded, SELECT the Feed
Forms
pushbutton on the window as many times as necessary to advance the
forms enough to thread the postprocessing device.
10.
SELECT
the Completed pushbutton on the window.
This completes this type of Thread/Align Forms procedure.
11.
To begin printing, SELECT the Ready pushbutton on the main Display Touch
Screen window.
Print While Threading
1.
SELECT
the Yes option within the Print While Threading? field.
2.
SELECT
the Start pushbutton.
This informs the control unit to begin the thread/align process.
3.
SELECT
the Feed Forms pushbutton on the Thread/Align Forms window.
a.
This prints a solid alignment mark after the leading edge on a page in
Printer 1, which is designated as an alignment page.
A one-bar or two-bar pattern is also printed on the alignment page. The
bar shows whether Side 1 or Side 2 of the form is being printed on Printer
1.
160
InfoPrint 3000 Operator’s Guide
|
|
|
|
|