Forms are not loaded in printer 2, Threading without printing – IBM INFO PRINT 3000 User Manual
Page 190
Important
If your visual verification of alignment is incorrect, all following duplex
print jobs are printed with incorrect alignment between the front and back
of the pages.
8.
If a postprocessing device is installed and not threaded, SELECT the Feed
Forms
pushbutton on the window as many times as necessary to advance the
forms enough to thread the postprocessing device.
Printer 2 prints Side 2 pages starting on the page following the alignment page
during these forms forward movements. If the queued job is long enough,
Printer 1 continues printing Side 1 pages.
9.
SELECT
the Completed pushbutton on the window.
This completes this type of Thread/Align Forms procedure.
10.
To resume printing the queued job, SELECT the Ready pushbutton on the
main Display Touch Screen window.
Forms Are Not Loaded In Printer 2
These procedures assume the following:
v
You have visually checked that forms have been threaded in Printer 1, and
forms are not loaded in Printer 2.
v
The main Thread/Align Forms procedure window appears on the Display Touch
Screen.
v
A print job is queued if you intend to select the “Print While Threading”
Yes
option.
Threading Without Printing
1.
SELECT
the No option within the Print While Threading? field.
2.
SELECT
the Start pushbutton.
158
InfoPrint 3000 Operator’s Guide