IBM INFO PRINT 3000 - Manual (Page 251)

Configuring the Printer
This procedure lets you view, update, or print a copy of the printer configuration.
Note: The printer can have multiple sets of configuration data: one for each mode
in which the printer can operate. To update a configuration for a particular
mode, the printer must be running in that mode.
1. Before you print the printer configuration, ensure that all attachments are
disabled. See “Enabling and Disabling Attachments” on page 63 for more
information. You do not need to disable attachments if you are viewing or
changing the configuration.
2. To access the configuration settings, do one of the following:
v
In simplex or duplex mode, SELECT the Configure pull-down menu.
v In dual simplex mode, SELECT the Configure pull-down menu on the
Display Touch Screen window of the printer with which you want to work.
3.
SELECT the Configure Printer procedure. The Configure Printer window
appears. Use the scroll bar to scroll through the list of configuration items. For
information about configuration items, see Table 16 on page 221 or SELECT the
Help pushbutton on the Configure Printer window.
4.
To print a copy of the configuration, do the following:
a. SELECT the Print... pushbutton. You see the Print Configuration window.
b. To change the number of copies you print, do the following:
1)
SELECT the How Many? field.
2) Type the number of copies you want to print.
3) SELECT the OK pushbutton.
Figure 34. Configure Printer Window
Chapter 8. Configuring the System
219
|
|
|