IBM INFO PRINT 3000 - Manual (Page 148)

3. Do step 1 on page 103 through step 26 on page 110 under “Loading Forms
(Simplex or Dual Simplex Mode)” and return here.
You now have forms in the stacker of Printer 1.
4. Use the Forms Feed pushbutton on the Stacker Control Panel as necessary to
advance enough forms to thread the Buffer/Flipper Unit, the Urge Unit, and
Printer 2.
5. Thread the forms through the Buffer/Flipper Unit (2) (see “Threading the
Buffer/Flipper Unit” on page 167).
6.
Bring the forms under the control unit of Printer 2 to the Urge Unit (9).
7. Thread the Urge Unit.
8. Thread the forms through Printer 2 using steps 1 on page 103 through 37 on
page 114 of Loading Forms (Simplex or Dual Simplex Mode).
9. Ensure that the paper in Printer 1 is aligned with the forms scale on the rear
tractor cover.
10. Go to the Thread to Align menu to ensure proper alignment. See
“Thread/Align Forms” on page 152.
116
InfoPrint 3000 Operator’s Guide
|
|
|
|
|