IBM INFO PRINT 3000 - Manual (Page 65)

Chapter 4. Using the Display Touch Screen
This chapter describes the Display Touch Screen windows and their associated
components. These windows are similar to those that are used in OS/2 and other
graphical environments.
The Display Touch Screen is touch-sensitive. To interact with it, you touch the
screen as though you were pressing a pushbutton switch, making a selection from
a list, or entering data on a keyboard.
The graphics in this book that depict the Display Touch Screen do not match the
actual windows in every detail. The windows on your Display Touch Screen have
a title bar at the top that is not shown in this book.
Using the Display Touch Screen in Duplex and Dual Simplex Modes
In duplex mode, the two printers work as one logical printer and are controlled
from a single Display Touch Screen.
In dual simplex mode, each physical printer works independently of the other. The
monitor has two logical Display Touch Screens, one for controlling each printer. To
switch from one printer to the other, select the Next Printer pushbutton on the
Main Window.
Note: Although most of the artwork in this book shows a Display Touch Screen
that is in duplex mode, the simplex mode Display Touch Screen looks
virtually the same.
© Copyright IBM Corp. 1998
33