IBM INFO PRINT 3000 - Manual (Page 152)

Nonprocess Runout (NPRO)
The Nonprocess Runout (NPRO) function lets you move forms from the transfer
station to the stacker. To add an extended length to the standard NPRO length (for
example, if you use a postprocessing device), you can do the following:
v
Increase the “NPRO Length” configuration item under the Configure Printer
procedure. See “Configuring the Printer” on page 219 and “NPRO Length” on
page 223 for more information.
v Increase an enabled preprocessing or postprocessing device “Pre/postprocessor
Extended NPRO” characteristics item under the Configure Pre/Post procedure.
See “Configuring Preprocessing/Postprocessing Devices/Interfaces” on page 241
and “Extended NPRO” on page 243 for more information.
See “Advancing Forms Using the NPRO and NPRO Page Functions” on page 75
for detailed information and instructions about NPRO and NPRO Page.
120
InfoPrint 3000 Operator’s Guide