IBM INFO PRINT 3000 - Manual (Page 233)

Changing the Fine Filter
Attention!
You may leave printer power on while you perform this task, but the printer
should not be printing.
To clear this action message, the printer power must be on while you replace
the fine filter.
Do this task when you see the following message:
CHANGE FINE FILTER 0791
Note: You do not have to replace the fine filter the first time you see the CHANGE
FINE FILTER message. To bypass the message, SELECT the Ready
pushbutton on the main Display Touch Screen.
The CHANGE FINE FILTER message reappears each time end-of-forms is
reached, an error condition occurs, or every 4 000 feet of forms thereafter.
When 100 000 additional feet of forms have been processed since the
message originally appeared, you must change the fine filter before you can
return the printer to Ready status.
1. Locate a new fine filter.
2. From the rear of the printer, open the rear center cover.
Chapter 7. Ordering and Replacing Supplies
201
|