IBM INFO PRINT 3000 - Manual (Page 270)

Table 20. Ethernet TCP/IP Attachment Items (continued)
Configuration Item Description Value Options
Ethernet Type Specifies either the Standard or the IEEE802.3 Ethernet
type.
Standard or IEEE802.3
Hardware address Specifies the TCP/IP Token Ring adapter ROM address. This address cannot be changed.
Alternate address
(Local adapter
address)
Sets the unique LAN adapter address for the network.
The address must be different from other addresses on
the LAN.
X'0' to X'FFFFFFFFFFFF'
Cable type This is the type of Ethernet cable connector used in the
back of the printer.
10Base2 or 10Base5
238
InfoPrint 3000 Operator’s Guide