beautypg.com

Configuring remote access – IBM INFO PRINT 3000 User Manual

Page 277

background image

Configuring Remote Access

This procedure lets you enable and configure remote access to the printer. You can

use these methods:
v

SNMP (Simple Network Management Protocol)

v

RMI (Remote Management Interface)

v

Modem.

To configure remote access, do the following:

1.

SELECT

the Configure pull-down menu on the main Display Touch Screen

window.

2.

SELECT

the Remote Access procedure.

3.

SELECT

the type of remote access that is to be used.

4.

Enable or disable remote access for the type of remote access that you chose in

the previous step.

Note:

If Allow to Configure is set to Yes for SNMP or RMI, that interface is

allowed to remotely change selected printer configuration items.

Chapter 8. Configuring the System

245