Print while threading – IBM INFO PRINT 3000 User Manual
Page 188
You must now restart this Thread/Align Forms procedure by using the
Operate
menu.
6.
After you have visually verified that the Printer 1 alignment mark is aligned
correctly on Printer 2, SELECT the Mark is Aligned pushbutton on the
window.
At the Verification window, SELECT the OK pushbutton.
This informs the control unit that the alignment is complete.
Important
If your visual verification of alignment is incorrect, the following duplex
print jobs are printed with incorrect alignment between the front and back
of the pages.
7.
If a postprocessing device is installed and not threaded, SELECT the Feed
Forms
pushbutton on the window as many times as necessary to advance the
forms enough to thread the postprocessing device.
8.
SELECT
the Completed pushbutton on the window that closes this window.
This completes this type of Thread/Align Forms procedure.
9.
SELECT
the Ready pushbutton on the main Display Touch Screen window to
begin printing.
Print While Threading
1.
SELECT
the Yes option within the Print While Threading? field.
2.
SELECT
the Start pushbutton.
3.
SELECT
the Forms are Connected pushbutton.
4.
SELECT
the Feed to Align pushbutton on the Thread/Align Forms window.
a.
This prints a solid alignment mark after the leading edge on a page in
Printer 1, which is designated as an alignment page.
156
InfoPrint 3000 Operator’s Guide
|
|