Running traces, Traces window – IBM INFO PRINT 3000 User Manual
Page 180
Running Traces
The Traces procedure lets you select, start, stop, and print traces.
Note
v
Trace affects both printers when you are printing in duplex mode. In
simplex mode, all trace actions (Start, Stop, Save, and Print) apply to only
to that printer.
v
Tracing may affect performance.
v
The Configure... action requires Customer Engineer authorization.
1.
SELECT
the Analyze pull-down menu on the main Display Touch Screen
window.
2.
SELECT
the Traces procedure. The Traces window appears with a list of the
available traces and the current status of each.
3.
To start a trace:
a.
SELECT
the trace you want to run from the Select a Trace box.
b.
SELECT
the Start Trace pushbutton.
4.
To stop a trace:
a.
SELECT
the trace you want to stop from the Select a Trace box.
b.
SELECT
the Stop Trace pushbutton.
5.
To save trace data:
a.
Stop all traces.
b.
SELECT
the Save pushbutton.
c.
Insert a diskette in the diskette drive, and SELECT Save on the verification
window that appears.
Figure 29. Traces Window
148
InfoPrint 3000 Operator’s Guide