IBM INFO PRINT 3000 - Manual (Page 292)

Table 25. Configuration Worksheet – Simplex Model (continued)
Item Available Values Selected Value
ESCON Link A Installed Yes / No
ESCON Link B Installed Yes / No
Device Address 00 to FF (Hexadecimal)
Multi-host Environmental Flag True / False
Card 1 Slot Position 2 / 4 / Not Installed Automatically set at power on,
cannot be changed.
Card 2 Slot Position 2 / 4 / Not Installed Automatically set at power on,
cannot be changed.
Token Ring TCP/IP Configuration:
Installed
Yes / No
TCP Port 5001 to 65536
IP Address X.X.X.X where X ≤ 255
Subnet Mask X.X.X.X where X ≤ 255
Default Gateway Address X.X.X.X where X ≤ 255
MTU Size 60 to 4096
Hardware address Cannot be changed
Alternate address X'0' to X'FFFFFFFFFFFF'
Ring Speed 4 or 16
Confine Broadcast Yes / No
Ethernet TCP/IP Configuration:
Installed
Yes / No
TCP Port 5001 to 65536
IP Address X.X.X.X where X ≤ 255
Subnet Mask X.X.X.X where X ≤ 255
Default Gateway Address X.X.X.X where X ≤ 255
Standard MTU Size 60 to 1500
IEEE8023 MTU Size 60 to 1492
Ethernet Type Standard or IEEE8023
Hardware address Cannot be changed
Alternate address X'0' to X'FFFFFFFFFFFF'
Cable type 10Base2 or 10Base5
PREPROCESSING/POSTPROCESSING INTERFACE CONFIGURATIONS:
DEVICE Number__________
Port Number
1 / 2 / 3
Enabled Yes / No
Name 1 to 12 alphanumeric characters
(including spaces)
260
InfoPrint 3000 Operator’s Guide