IBM INFO PRINT 3000 - Manual (Page 217)

11. Close the toner cartridge latch (1).
12. Place the carton lid on the lower lip of the toner hopper with the edge of the
carton lid under the upper lips of the toner hopper.
13. Remove the cartridge seal from the toner cartridge by firmly pulling on the
tab and rolling it under the seal until the seal is completely removed. Place
the rolled seal in the carton lid.
14. Remove the carton lid from the toner hopper. Discard the carton lid, the
cartridge seal, and the carton with the used toner cartridge.
15. Clean any spilled toner.
16.
Go to “Changing the Toner Collector” on page 188 to change the toner
collector.
Chapter 7. Ordering and Replacing Supplies
185