IBM INFO PRINT 3000 - Manual (Page 241)

10.
Roll the upper roll down against the lower roll.
11.
Holding both rolls, press the lower oiler-belt roll to the right against the
spring.
12.
Remove the lower oiler-belt roll by removing the left end first.
13. Place the old oiler belt on several thicknesses of absorbent material, such as
paper towels.
14. Remove the new oiler belt from its carton, saving the plastic bag for the old
oiler belt.
Operator Tip
The oiler-belt roll with the most material is the upper roll. The notched
end of the roll is the right side (nearest the printer).
Chapter 7. Ordering and Replacing Supplies
209