Messages with system reference codes – IBM INFO PRINT 3000 User Manual
Page 312
Table 29. Printer Status Window - Status Field Messages (continued)
Message
Description
WARMING UP
In duplex mode, the fuser in one or both system printers is warming up so that print
jobs can begin.
In simplex mode, the individual printer fuser is warming.
SLEEPING
In duplex mode, the Printer Configuration “Fuser Inactivity Timer” in one or both
system printers has timed out and the fuser has been turned off.
In simplex mode, only the fuser in the individual printer has been turned off.
NOT AVAILABLE
In duplex mode, the Display Touch Screen cannot communicate with either or both of
the system printers.
In simplex mode, the Display Touch Screen cannot communicate with the individual
printer.
In either duplex or simplex modes, when an enabled preprocessing or postprocessing
device has been powered off.
PRINTING
In duplex mode, the system is printing.
In simplex mode, only the individual printer is printing.
TRACING
In either duplex or simplex modes this indicates that a trace operation is running.
PRE/POSTPROCESSOR BUSY
In either duplex or simplex modes this indicates that an enabled preprocessing or
postprocessing device is showing “Busy” status on its interface.
PRE/POSTPROCESSOR NOT
READY
In either duplex or simplex modes this indicates that an enabled preprocessing or
postprocessing device is showing “Not Ready” status on its interface.
PRE/POSTPROCESSOR EOF
In either duplex or simplex modes this indicates that an enabled preprocessing or
postprocessing device is showing “End-of-File” status on its interface.
PRE/POSTPROCESSOR PAUSED
In either duplex or simplex modes this indicates that an enabled preprocessing or
postprocessing device is showing “Paused” status on its interface.
“Blank”
No secondary status message to display.
Messages with System Reference Codes
The following table lists all of the messages that include a system reference code.
There are three types of messages included:
Out of Supplies
The message appears on the Out of Supplies window (see “Out Of
Supplies Messages” on page 276).
Intervention Required
The message appears on the Intervention Required window (see
“Intervention Required Messages” on page 277).
Printer Error
The message appears on the Printer Error window (see “Printer Error
Note:
All of the messages are Printer Error messages unless noted otherwise. Also,
note that all of the following messages appear on the Printer Display Touch
Screen
.
280
InfoPrint 3000 Operator’s Guide