IBM INFO PRINT 3000 - Manual (Page 112)

To Change the Password or Authorization Level, do the following:
1.
From the Options pull-down menu, SELECT Password.
2.
To change the Authorization Level, SELECT the Authorization Level to which
you wish to change.
If you are not changing to the Operator level, then the Password Keypad
window appears. Enter the password, and SELECT the OK pushbutton.
3.
To change a password, first SELECT the Authorization Level you wish to
change. Then do the following:
a.
If you select a level that the system is not currently in, the Password
Keypad window appears. Enter the password, and SELECT the OK
pushbutton.
b. When the Password window returns, SELECT the Change pushbutton. The
Password Keypad window appears.
c. Enter the new password and SELECT the OK pushbutton to change the
password.
If you decide not to change the password, SELECT the Cancel pushbutton.
Operate Configure Analyze Options Help
Ready Check Reset NPRO Cancel Job
HC6OG091
Assign Form to Load...
Enable/Disable Attachments...
Password...
Change Language...
Clean Screen...
Calibrate Touch Screen...
Front Face...
Special Features...
Figure 23. Options Pull-Down Menu
80
InfoPrint 3000 Operator’s Guide