IBM INFO PRINT 3000 - Manual (Page 129)

STACKER AREA:
28.
Open the stacker gate (5) if the buffer/flipper unit or an installed
postprocessing device does not interfere.
29.
Use a toner-certified vacuum cleaner to clean paper dust, chads, and other
debris from the following:
v
Pendulum (1)
v Stacker table (2)
v Stacker floor (3)
v Finger belts (4)
If you cannot open the stacker gate completely because of interference from
the buffer/flipper unit or an installed postprocessing device, open the gate as
wide as you can. Clean as much of the area as you can reach.
Chapter 6. Operator Responsibilities
97
|
|
|
|
|