IBM INFO PRINT 3000 - Manual (Page 245)

4. Open the oiler-belt gate.
5.
Check to see if the absorbent pad is saturated with oil. If the pad is saturated,
continue with step 6. If it is not saturated, go to step 15 on page 215.
6. Allow the printer to cool for at least 30 minutes.
7.
Lower the hot roll shield.
HC6OG051
FORMS WIDTH
18 17 16 15 14 13 12 11 10 9 8
FO RM S W ID TH 18 17 16 15 14 13 12 11 10 9 8
Chapter 7. Ordering and Replacing Supplies
213