IBM INFO PRINT 3000 - Manual (Page 174)

8. If forms remain in the fuser, do the following:
a. Open the oiler-belt gate.
b.
Lower the hot roll shield.
c. Remove any forms you see.
d. Raise the hot roll shield.
e.
Close the oiler-belt gate.
9. Return to the appropriate jam message listed in Table 12 on page 123, Table 13
on page 129, or Table 14 on page 131.
CAUTION:
<70> The oiler belt, oiler wick roll, and their environments are
areas. Be very careful when working in
these areas.
high-temperature
CAUT0100
142
InfoPrint 3000 Operator’s Guide