IBM INFO PRINT 3000 - Manual (Page 211)

Adding Fuser Oil
Attention!
You may leave printer power on while you perform this task, but the printer
should not be printing.
Using the wrong fuser oil can cause print quality problems. See Table 15 on
page 177 for the correct part number.
Do this task when you see the following message:
ADD FUSER OIL
You need the following items when you add fuser oil:
v
Fuser oil bottle
v Plastic spout (which is packaged with the oil)
v Paper towels.
Note: You do not have to replace fuser oil the first time you see the ADD FUSER OIL
message. To bypass the message, SELECT the Ready pushbutton on the
main Display Touch Screen.
The ADD FUSER OIL message reappears each time end-of-forms is reached, or every
4 000 feet of forms thereafter. When 50 000 additional feet of forms have been
processed since the message originally appeared, you must add fuser oil before you
can return the printer to Ready status.
Chapter 7. Ordering and Replacing Supplies
179