IBM INFO PRINT 3000 - Manual (Page 154)

attempt to find that same page in the stacker or a postprocessing device. If you
find it, discard all pages starting with that page.
In all cases but one, the automatic reprinting of pages recovers all pages that might
have been lost or damaged as the result of the jam. The exception occurs when a
FUSER WRAP 0134 jam type is detected. A jam of this type can backup
(accordion-pleat) the forms until the error is detected and the forward movement
of the forms stopped. If this occurs, a few lost pages are not automatically
reprinted. You need to work with the host system console operator to take action
to recover those lost pages.
If the printer is not configured to recover lost pages, you may need to ask the host
system console operator to do one of the following:
v
Restart the job at the point where the output was lost
v Restart the entire job.
Jams Within the Printer Engine
Do this task when a Printer Error Display Touch Screen window shows one of the
messages that are listed in Table 12 on page 123. All of the messages apply to all
printer models unless otherwise noted.
122
InfoPrint 3000 Operator’s Guide