Grass Valley Kayenne v.3.0 - Manual (Page 56)

56 KAYENNE — User Manual
Section 2 — Concepts
effect is an important concept, as it defines a relationship between the effect
registers and the work buffer. Only a current effect can be run or edited.
Figure 29. Work Buffer and Current Effect
The work buffer actually holds a copy of some of the effect register infor-
mation. When an operator changes a control setting manually, the work
buffer settings change but the effect register data itself remains unaltered
(
Figure 30 ).
Figure 30. Work Buffer Operational Change
When an effect is learned, the current operational settings in the work
buffer are loaded into the specified effect register, overwriting any informa-
tion that was in that register. If a register different from the current effect is
learned, the information is loaded into it and that register becomes the
current effect. In this case the original effect register will not be altered, and
can be instantly recalled to return the system to its earlier state (
Figure 31 ).
0618_00_37
Effect
Registers
Work
Buffer
Effect 1
Recalled
0 1 2 99
Effect 1
Settings
Current
Effect
Effect 1
Keyframe
0618_00_38_r1
Effect
Registers
Work
Buffer
Operational
Change,
Effect Register
Unaffected
0 1 2 99
Settings
Modified
Current
Effect
Effect 1
Keyframe
(no change)