Grass Valley Kayenne v.3.0 - Manual (Page 416)

416 KAYENNE — User Manual
Section 3 — System Operation
Image Store (Stills)
With Kayenne Image Store, you can capture or transfer still images to take
to air or use as part of an effect. Video, key, and paired video/key images
can be captured for playback with Image Store. JPEG, TIFF, BITMAP and
Kalypso (.gva/.gva) images are converted when transferred into the Image
Store Cache from disk. Image Store Channels 1-6 can be paired as
video\key pairs (three video/key pairs maximum). Images are assigned an
‘Image ID’ (either automatically or manually via keypad) and can be given
an ‘Image Name’.
Images can be selected and loaded from the Kayenne Menu or Control
Panel, using the DCM (Device Control Module) or the System Bar.
File Format
Locally, images are stored as a .KIF (Kayenne Image Format) file.
Setup Information
For Engineering Setup information, see the Kayenne Installation and Service
Manual.
Image Store Input Aux Delegate Mapping
Delegate Image Store inputs to the aux bus destinations on the Local Aux
Module:
1. Go to the Aux Delegate Mapping menu by touching User Setups , Panel
Prefs , Aux Delegate Mapping ( Figure 260 ).
2. Select a Local Aux Module button in the Button/Delegation scrolling
list (
Figure 260 ).
3. Select an Image Store input ( IS 1 - IS 6 ) in the Image Store Inputs button
delegation column ( Figure 260 ).
4. Repeat Steps 2 and 3 for up to six Image Store inputs.