Grass Valley Kayenne v.3.0 - Manual (Page 312)

312 KAYENNE — User Manual
Section 3 — System Operation
Source Table File Operations
Source Tables are part of Kayenne file operations: File Ops, Source
Tables menu. You can perform all the same file operations: copy, paste,
save, load, etc., as with other File Ops menus. For more about File Oper-
ations, see File Operations
on page 153 .
Linking Busses
Linking Busses one-to-one
1. In the Links Setup menu, touch the Controlling Bus data pad.
2. Touch the ME/Aux/eDPM menu tab.
3. Touch the desired bus or eDPM input.
4. Touch the Linked Bus data pad and repeat Steps 1-3.
The Link Setup menu displays the newly linked busses in the Current
Link pane. The link is enabled and the Standard Source Table is selected
as the default (Source Tables are grayed out).
You can disable or break the link using the Enable / Break buttons in the
Current Link pane (the Enable button in the Table Setup pane will also
enable/disable the selected link).