Grass Valley Kayenne v.3.0 - Manual (Page 330)

330 KAYENNE — User Manual
Section 3 — System Operation
When the Gang button is high-tallied green, then there is an active gang
associated with the selected letter button. To temporarily disable the gang,
press the
Gang button; it will low tally green, then make an adjustment.
Pressing Gang again, will re-enable the gang. For example, this can be used
where one device is video and the other key. By pressing the Gang button
you can turn off the gang temporarily, jog the key channel to more precisely
align it with the fill, and then re-enable the gang.
Panel Gangs
The “Panel Gang” (Local Aux Bus gang) and the gang on the ‘ F ’ button are
the same when the SDEL button is selected. Gang selections made from the
DCM in this way also affect gang selections made in the Local Aux Bus
Module and vice versa.