Grass Valley Kayenne v.3.0 - Manual (Page 267)

KAYENNE — User Manual 267
eDPM Operations
Source Ops Menu
To access the eDPM menu, touch Source Ops , eDPM.
Figure 178. eDPM Source Ops, eDPM Menu
To assign sources in the eDPM Mode Source Ops, eDPM menu (also avail-
able in the Switcher Source Ops menu):
1. Touch the input channel button for the channel you wish to assign a
source (Channel 1-4).
2. Scroll and touch the source you wish to assign to the eDPM channel
from the Sources scrolling list (
Figure 178 , right side of menu).
Note If you touch an eDPM Fill button first, then a source, the Cut and Fill signal
for that channel will be the same. Touch the Cut button to assign a different
source for the Cut button.
3. Repeat Steps 1 and 2 for up to four input sources for each eDPM
channel.