Grass Valley Kayenne v.3.0 - Manual (Page 241)

KAYENNE — User Manual 241
iDPM Operations
When off, the Speed soft knob is available to adjust the speed of the pattern’s
motion. Negative values can be entered to reverse the direction of the
motion.
H/V Angle — defines the angle of the Position Modulation with respect to
the source X and Y axes.
Mod Type Pane
With an axis selected, you select the type of modulation to be applied to
that axis (
Position Mod or Size Mod ), or no modulation at all with the Mod Off
button in the Modulation Mode pane. When the Vertical axis is selected, you
can choose to have that axis’ modulation values match the horizontal
values with the
Track Horiz button.
When Size Mod is selected in the Modulation Mode pane, the Size Mod
Center data pad in the Modulation pane is active. When this data pad is
selected soft knob controls for
H Position , V Position , and H/V Angle are avail-
able ( Figure 163 ).
Figure 163. Kurl Menu, Size Mod Center
Pattern Pane
The type of wave pattern to be applied to the selected axis and modulation
type is selected in the Pattern pane.