Grass Valley Kayenne v.3.0 - Manual (Page 326)

326 KAYENNE — User Manual
Section 3 — System Operation
cancelled by pressing the soft knob (Gang Cancel), second from the top in
the Multi-Function Module.
Once a gang is created (more than one device is high tally), buttons GCUE
(Gang Cue, causes a gang to cue) and GPLAY (Gang Play, causes a gang to
play) appear below the joystick.
The first soft knob from the top controls the Auto Cancel function which
has two states,
Pressing an individual PLAY, CUE, or STOP button causes only the selected
device to respond to the command. This is beneficial for example if a
director calls for a device to be individually controlled.
GOTO Mode
Pressing the GOTO TC button on the Multi-Function Module provides dele-
gation to the Timecode Entry mode, and delegates control over the Time-
code display in the upper left of the Main function area (
Figure 214 ).
Entering the first digit causes the display to be set to zero and the first
number entered. Additional entries accumulate from right to left.
Plus ( + ) and minus ( - ) buttons are provided on the Multi-Function Module
in GOTO mode to perform trim operations.
To enter the timecode:
1. Press the GOTO button.
2. Enter the timecode using the examples below.
3. Press the ENTER button. The Multi-Function Module returns to Device
Control mode.
Examples of Timecode entries
• 22 — 00:00:00:22
• 2 — 00:00:00:02
• 102 — 00:00:01:02
The CLR button on the Multi-Function Module empties the buffer and resets
timecode display to the current timecode.
Pressing the HOME button returns the Multi-Function Module to the Device
Control mode.
Device Control with the Device Control Module
The Kayenne Device Control Module ( Figure 215 ) provides essential
device control which can replace auxiliary devices such as DNF and Lance