Grass Valley Kayenne v.3.0 - Manual (Page 355)

KAYENNE — User Manual 355
Router Control of Aux Busses
Enable the Aux Busses for router control ( Figure 226 ):
1. Touch the Aux button in the Output Type.
2. Touch a Aux 1-46 data pad in the Logical Aux Bus pane to designate it
for router control.
3. Touch the Router Control selector button (highlights green when
selected).
Repeat Steps 1-3 for each Aux Bus you wish to control by router.
The router must have the switcher sources defined and the 46 Aux Busses
defined as destinations, with four levels each (see the documentation that
came with your router):
Level 1: Suite 1 Video,
Level 2: Suite 1 Key,
Level 3: Suite 2 Video, and
Level 4: Suite 2 Key.
Once configured, you can switch Kayenne sources on Aux Busses from the
external router.
Note A Prelude router can communicate directly with the Kayenne switcher.