Grass Valley Kayenne v.3.0 - Manual (Page 452)

452 KAYENNE — User Manual
Section 3 — System Operation
Newton Modular Control
Introduction
The Newton modular control system provides comprehensive and consol-
idated real-time control of Grass Valley modular products. Some Newton
functionality has been incorporated into the Kayenne Menu Application.
This makes it possible to control Grass Valley Gecko and Kameleon frame
modular products from a Kayenne Menu panel or PC running the Kayenne
Menu Application. The modular frames must reside on the same subnet as
the Kayenne system (
Figure 286 ).
Figure 286. Newton Modular Control Diagram
Installation on Kayenne
Kayenne’s Newton interface is installed during the standard Kayenne
Menu Application installation procedure. The Newton menu (
Figure 288
on page 454 ) is available on all Kayenne systems running 1.5.2 or newer
software. However, a Newton system must be available on the Kayenne
network, and configuration steps will be required before this menu
becomes functional.
Selecting the NetConfig installation option from the Kayenne Installer
program will install a compatible version of NetConfig with the NetConfig
Newton Configurator plug-in.
BNC
Inputs
Video in
Video in
8623266_91
Video Out
Video Out
Example Function:
Aspect Ratio Converter
Example Functions:
Frame Sync, Video A to D
Gecko and Kamelon Knob Controls
built into Kayenne Menu Application
Five Setups per Channel
Kayenne Video
Processor Frame
Gecko Frame
Kamelon Frame
Ethernet
Switch
Kayenne
Menu
Panel