Grass Valley Kayenne v.3.0 - Manual (Page 223)

KAYENNE — User Manual 223
iDPM Operations
Key Off Control
The Key Off button (see Figure 146 on page 221 ) is used to turn off the key
signal processing for the delegated keyer, resulting in a full raster image.
For example, suppose you want to fly a graphic that is normally accompa-
nied by a key signal. Turning the key off forces the graphic to full raster,
ignoring the key. The
Key Off button is inactive for Global channels.
Easy Cube Control
When a channel is used to create a cube or slab, turning on the Easy Cube
button (see Figure 146 on page 221 ) automatically translates the delegated
channel to the visible face of the shape as it is rotated in space.
Keyer Partition Visibility
Keyers assigned to the Secondary Partition output can be made visible on
the Primary Partition output and vice versa by touching the Key buttons in
the Primary Keyers Visible on Primary/Secondary Partition panes.
Assigned key buttons can also be turned on and off in the ME Output pane
(far right).
In the example in Figure 148 , Key 2 and Key 3 on the Secondary Partition
were made visible on the Primary Partition by touching Key 2 and Key 3 in
the Secondary Keyers Visible on Primary Partition pane.
The keyers will be visible in the Primary Partition but are controlled only
by the Secondary.