Grass Valley Kayenne v.3.0 - Manual (Page 448)

448 KAYENNE — User Manual
Section 3 — System Operation
Figure 283. Source Ops, Cameras, Live Ops Menu
Live Ops
Kayenne camera control provides the ability to place cameras into a usable
but not fully shaded setup/rehearsal mode using the menu buttons in the
Live Ops menu tab (
Figure 283 ):
• Camera Sources —Select from 1-99 defined camera sources for control.
• Color Bars —Enable/disable color bars to verify the camera as the associ-
ated source.
• Auto Iris —Enable/disable camera’s Auto Iris.
• Auto Black —Triggers a reset of camera’s black level.
• ND (Neutral Density) Filter — Changes the neutral density filter wheel set-
ting.
Use back and forward arrow buttons ( Figure 283 ) to scroll through and
enable 1/4, 1/16, 1/64 filter wheel settings, or CLR to clear the filter
wheel setting.
Ethernet Tally Operations
When installed and configured, the Kayenne switcher sends tally over
Ethernet to cameras. This is described in the Kayenne Installation & Service
Manual. In addition, the
Red , Yellow , and Green buttons in the Source Ops,