Mix through video transition – Grass Valley Kayenne v.3.0 User Manual
Page 167
KAYENNE — User Manual
167
Transitions
Mix Through Video Transition
One common application of a Mix Through Video transition is to add a
white flash to simulate a photographer’s flashbulb. To set up a simple
white flash effect do the following:
1.
Go to the ME, Mattes menu.
2.
Select the ME for the transition (left pane).
3.
Select the Base Color data pad (right pane).
4.
Set the Brightness to 100% and the Saturation to 0% with either the soft
knobs or the popup keypad to create a white matte. The matte will
appear in the Base Color box.
5.
Go to the ME, User Trans menu.
6.
Select the
User Trans Mix Through Matte
(1-6) button.
7.
In the ME, User Trans menu, touch the
Full Screen
button under
‘Intermediate Video Appears’ to create a full raster effect.
8.
Change the
Initial Mix Ends at
to a lower number to sharpen the slope of
the mix from the initial to the intermediate video as shown in
Figure 114. Camera Flash Mix Values