Grass Valley Kayenne v.3.0 - Manual (Page 181)

KAYENNE — User Manual 181
E-MEM Operations
E-MEM Operations
The E-MEM (Effects Memory) system provides a way of storing effects for
later use. An effect defines parameter settings that determine how the
selected video sources are processed. An E-MEM effect is learned into an
effect register, and can then be recalled at a later time with a single button
press. Effects can be edited after they have been learned, and effect data can
also be saved to and loaded from disk.
For a general description of E-MEMs, see E-MEM (Effects Memory) on
page 55 .
The Kayenne system has 1000 E-MEM registers organized into Pages and
Banks. There are ten pages of ten banks with 100 E-MEM registers each,
that can be learned and recalled in the Local and Master E-MEM Modules.
Register operations such as Learn and Recall can be performed in the
current page and bank or changed before selecting the desired register.
Learning Registers
On the Local E-MEM Module there are various modes. Pressing the EMEM
button selects the E-MEM mode.
Learn a Register in the Current Bank
1. Create the effect.
2. Press the LRN button.
3. Press the keypad number of the desired register.
Learn a Register from a Different Bank
1. Create the effect.
2. Press the Page button (if necessary).
3. Press the button for the desired page: 0, 100-900.
4. Press the BNK button.
5. Press the button of the desired bank.
6. Press the keypad button of the desired E-MEM register.
Alternatively, you can perform the Page and Bank selections, press the LRN
button, then press the desired register button.