Delegation, Me delegation, Exchange me – Grass Valley Kayenne v.3.0 User Manual
Page 109
KAYENNE — User Manual
109
Control Panel Overview
a rate starting from unity speed to the maximum shuttle speed of
the device. A complete 360 degree rotation of the Jog knob causes
the device to be at its maximum shuttle speed, and
•
Var
—Starting from a pause condition, the first 360 degree forward
rotation of the Jog knob scales play speed from zero to 1.0, then the
next 360 degree rotation scales between 1.0 and 3.0, the maximum.
•
Load
—Loads selected clip to delegated device.
Delegation
Delegation permits a single group of buttons and knobs to control a large
number of identical system functional areas, or objects. Delegation connects
a group of controls, to a particular object. Delegation makes it possible to
control many more system functional areas than would be possible using
dedicated, single function Control Panel buttons.
ME Delegation
Any stripe can control any ME, delegation can be saved in Panel Memory.
DELG Button
The light blue
DELG
button on any Local E-MEM Module puts that module
into Panel Delegation mode and displays ME-1 thru ME-4 (on 4-ME sys-
tems) and PGM PST in rows that correspond to the top to bottom Stripes on
that Control Panel. Current ME selections are high tallied with the defined
ME color. Pressing the button for an ME or PGM PST ME delegates the cor-
responding Stripe to the selected ME. The same selection can be made on
more than one row.
Note
Only those MEs for which there is an ME board present in the frame are dis-
played in Delegation mode on the Local E-MEM Module.
If the Control Panel has fewer than four Stripes, then only rows for those
Stripes present will be shown. If the Control Panel has more than four
stripes, then pressing the
Page
button on the Local E-MEM Module will
show the ME delegations for those additional Stripes.
Exchange ME
The
Exchange ME
button (see Transition Module
egate MEs that are not assigned to a Stripe. For example on a 4.5-ME
Kayenne system with four Stripes, the fifth ME can be ‘exchanged’ with a
currently delegated ME on that Stripe by pressing the
Exchange ME
button.
The function is global for all Stripes, i.e. if ME-4 is unassigned, pressing the
Exchange ME
button on the current PGM PST Stripe assigns ME-4 to that