Grass Valley Kayenne v.3.0 - Manual (Page 179)

KAYENNE — User Manual 179
Transitions
4. Touch the Key Chains selector button to access the Key Chaining menu.
5. Touch one of the 15 Key Chain data pads and Chain ME 1, Key 1 to
ME 2, Key 2 by touching those buttons in the Key Chaining pane.
6. Repeat Step 5 for ME 1/ME 2 Key 2 and ME 1/ME 2 Key 3.
7. Go to the Bus Linking menu by touching Source Ops , Bus Links .
8. In the Links Setup menu tab, touch the Controlling Bus data pad in the
Table Setup pane.
9. In the ME Busses pane, touch ME1 A .
10. Touch the Linked Bus data pad, and touch ME2 A in the ME Busses pane.
11. Repeat Step 9 and Step 10 for ME1 B and ME2 B .
The A and B busses for ME 2 will now follow the A and B busses for
ME 1.
12. To make ME 1 the controlling ME for the chain, press the ME 1 Bkgd
transition button on the Transition Module.
Multiple Feed
Starting with the example above, you could chain additional MEs for mul-
tiple feeds. This should be planned carefully but once configured, the entire
show can be switched from the Primary ME thus simplifying a very
complex set of operations.
Including Source Substitutions
Source substitutions can also be a powerful part of chained MEs. They can
be used to cut on two or more different sources for the chained MEs and
switched from the Primary ME. For example during a “Home” verses
“Away” baseball game, the Primary ME could take a camera source in the
Home team’s dugout on Source 1 but take a different camera on Source 11
on the Secondary ME in the Away team’s dugout using the source substi-
tution (see Source Substitution Tables
on page 309 ).
Source substitutions could also be used across multiple feeds for different
languages or for paid cable verses network feeds and so on.
File OPs
Transition Chaining is part of the Load Granularity pane in the File Ops,
User Setups, Suite Prefs menu.