Grass Valley Kayenne v.3.0 - Manual (Page 265)

KAYENNE — User Manual 265
eDPM Operations
Figure 176. eDPM Sub-levels in the E-MEM Master Timeline
Using definable sub-Levels allows for the recall of eDPM effects from Local
E-MEM. For example, effects created for ME 1 can have the eDPM definable
sub-levels and will then run eDPM effects.
Aux Delegation
eDPM input source selection is provided in three locations:
• Switcher Mode, Source Ops menu, eDPM Inputs,
• eDPM Mode, Source Ops, or
• The Local Aux Module (or any ME using the Aux delegation button on
the Source Select Module).
To assign the delegation for the eDPM V/K inputs to the Local Aux
Module:
1. Go to the Aux Delegate Mapping menu by touching User Setups , Panel
Prefs , Aux Delegate Mapping ( Figure 177 ).
2. Select a Local Aux Module button in the Button/Delegation scrolling
list (
Figure 177 ).
3. Select an eDPM channel ( eDPM 1 - 4 ) in the eDPM V/K Inputs button
delegation column ( Figure 177 , right side of menu).
4. Repeat Steps 2 and 3 for up to four eDPM inputs.
eDPM Definable
Sub-levels