Grass Valley Kayenne v.3.0 - Manual (Page 169)

KAYENNE — User Manual 169
Transitions
Transitions Using E-MEM
Transitions can also be built into E-MEMs. See E-MEM Transitions on
page 197 .
Aux Bus Transitions
With support for Aux bus transitions on the Local Aux Module, you can
mix or wipe between sources on an Aux bus. Kayenne allows you to use
one or more ME partitions to perform mixes or wipes on multiple aux
busses (“Half MEs” can only support a mix transition, not a wipe).
To perform a mix, a wipe, or a mixture of both transition types for a show,
you will need to allocate ME resources in the User Setups, Suite Prefs,
Resource Allocation menu (
Figure 116 ).
Figure 116. Resource Allocation Menu
Trans Lock Button
The Trans Lock button on the Kayenne Local Aux Module on the Control
Panel allows you to lock the selected mix or wipe as the transition type for
the selected aux bus (repeats when a source is taken on that aux bus). By
turning on the
Trans Lock button, the transition will continue to mix or wipe
until it is deselected. With the Trans Lock button off, a mix or wipe will only