Grass Valley Kayenne v.3.0 - Manual (Page 346)

346 KAYENNE — User Manual
Section 3 — System Operation
Ganging is used to synchronize external devices (channels) for motion
control (Play, Stop, Rewind, etc.). The AMP server performs synchronized
motion control from all channels in a gang.
The Device, Gangs menu is accessed by touching Devices , Gangs
( Figure 223 ).
Figure 223. External Device Gangs Menu
The Devices, Gangs menu has two panes with scrolling lists, each listing
the devices setup for Kayenne system control. A primary device is selected
in the Primary Devices pane on the left, and the devices to be ganged to that
primary device are selected in the Ganged Devices pane on the right.
Each device in the left pane has a button labeled with the name of the
device, and a text field that lists the devices currently associated with that
primary device. Selecting a device button in the left plane illuminates that
button, and delegates the right scrolling list to allow selecting and de-
selecting ganged devices for that primary device. The
Gang Enabled button in
this pane activates or deactivates the gangs that have been established
between the devices.
With a primary device selected in the left pane, the remaining devices avail-
able for ganging are displayed as active buttons in the right pane. Devices
not available for ganging are grayed out and inactive. Touching one of the
active buttons in the right pane illuminates its indicator, and that device’s
name is added to the text field of gangs for the primary device. Touching