Panel name, Inserting a delay, Playing back a macro register – Grass Valley Kayenne v.3.0 User Manual
Page 378
378
KAYENNE — User Manual
Section 3 — System Operation
5.
Touch the
Stop
button to end the macro recording.
You can name the macro either before you record it, or after by touching the
name data pad for that macro register to bring up a keypad.
Panel Name
The “Panel Name” column is provided in the Macro Catalog menu’s,
Macro List pane (refer to
), for entering a Panel Name (four char-
acters maximum). Kayenne displays that name in place of the Macro Reg-
ister Number in the Local E-MEM Module (when the Macro menu is
delegated by pressing the
Macro
button on the module).
Inserting a Delay
While recording a macro, press the
Insert Delay
button then press the keyer
source select button of the desired delay time. The
2nd
Shift
button (3rd and
4th are undefined for this function) splits the time interval selection
between fields (upper key row) and seconds (lower key row). Multiple
selections can be made to insert longer delays in both fields and seconds.
Playing Back a Macro Register
1.
Turn on Macro mode with the
Macro
button. If not already on, you may
also want to press the
Show Attach
button to display the macro names on
the source name displays.
2.
Select the macro to be played
•
On the Control Panel, press the keyer button of the desired macro
register. The
Shift
button accesses shifted macros (2nd, 3rd, and 4th).
•
On the Macro menu, touch the macro register button of the desired
macro register, then touch the
Play
button.
Attaching a Macro to a Panel Button Using the Control Panel
Pre-Attach a Macro
1.
Delegate the bus rows to Macro by pressing the
Macro
button (see
).
2.
Press and hold down the macro button to be attached.
3.
Press the keyer row button to which the macro will be attached (if
Show
Attach
is on, the panel button will flash until
Show Attach
is turned off).