Grass Valley Kayenne v.3.0 - Manual (Page 175)

KAYENNE — User Manual 175
Transitions
initiators. When the Lever Arm is moved, or the Auto button is pressed, the
keys transition together.
If a selection is made for a keyer in the primary partition, and the chained
controlled key is in the secondary partition, the controlled keyers will tran-
sition simultaneously with the keys in the primary partition, irrespective of
the delegation of the
SEC button (Source Select Module). The same is true
for selections made in the secondary partition with controlled keys in the
primary; they always delegate whether or not the
PRI button (Source Select
Module) is delegated. This behavior corresponds to the tally of the next-
transition buttons. The blinking tally indicates that the keys will transition.
Key Chaining Across MEs
As shown in Figure 120 (in blue), in the Chain 1 parameter data pad, the fol-
lowing multiple ME key chain has been created:
• PGM/PST, Key 1,
• ME3 Key 1, and
• ME1 Key1
Figure 120. Key Chaining Menu—Multiple ME Key Chaining
Selecting a keyer in the Next-Transition section of the Control Panel will
make that keyer the initiator. On the MEs with keyers in the chain, their
next-transition selections will be erased and the keyers in the chain