H3C Technologies H3C S3100 Series Switches - Manual (Page 885)

1-17
To do… Use the command… Remarks
Enable history record history-record enable
Optional
By default, history record is not enabled.
Configure the retaining
time of history record history keep-time
keep-time
Optional
By default, the retaining time of history record is 120
minutes.
Configure statistics
interval and the
maximum number of
retained statistics
information
statistics { interval
interval | max-group
number } Optional
By default, statistics interval is 120 minutes and up to
two pieces of statistics information can be retained.
Configure the retaining
time of statistics
information
statistics keep-time
keep-time
Optional
By default, the retaining time of statistics information
is 120 minutes.
Configure test start time
and lifetime
test-time begin
{ hh:mm :ss [ yyyy/mm/dd ]
| now } lifetime lifetime
Optional
By default, no test start time and lifetime is configured.
Enable routing table
bypass
sendpacket passroute
Optional
By default, routing table bypass is disabled.
Configure the TTL ttl number
Optional
By default, TTL is 20.
The sendpacket passroute command voids the ttl
command.
Configure the automatic
test interval
frequency interval
Optional
By default, the automatic test interval is zero seconds,
indicating no automatic test will be made.
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three seconds.
Configure the service
type
tos value
Optional
By default, the service type is zero.
Start the test test-enable Required
Display test results
display hwping results
[ admin-name
operation-tag ]
Required
The display command can be executed in any view.
9) Configuring DNS test on HWPing client
Follow these steps to configure DNS test on HWPing client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the HWPing client function hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create an HWPing test group and
enter its view hwping administrator-name
operation- tag
Required
By default, no test group is
configured.
Configure the test type test-type dns
Required
By default, the test type is ICMP.