H3C Technologies H3C S3100 Series Switches - Manual (Page 341)

4-4
Configuring IPv6 Multicast VLAN Ports
In this approach, you need to configure a VLAN as an IPv6 multicast VLAN and then assign user ports
to this IPv6 multicast VLAN by either adding the user ports in the IPv6 multicast VLAN or specifying the
IPv6 multicast VLAN on the user ports. These two methods give the same result.
Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view
Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:
To do... Use the command... Remarks
Enter system view system-view —
Configure the specified VLAN as
an IPv6 multicast VLAN and enter
IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
No IPv6 multicast VLAN
configured by default
Assign port(s) to the IPv6 multicast
VLAN
port interface-list
Required
By default, an IPv6 multicast
VLAN has no ports.
Configure IPv6 multicast VLAN ports in terface view
Follow these steps to configure IPv6 multicast VLAN ports in interface view:
To do… Use this command… Remarks
Enter system view system-view —
Configure the specified VLAN
as an IPv6 multicast VLAN and
enter IPv6 multicast VLAN view
multicast-vlan ipv6 vlan-id
Required
Not an IPv6 multicast VLAN
by default.
Return to system view quit —
Enter interface view interface interface-type interface-number —
Configure the port(s) as port(s)
of the IPv6 muticast VLAN
port multicast-vlan ipv6 vlan-id
Required
By default, a user port does
not belong to any IPv6
multicast VLAN.
z The VLAN to be configured as an IPv6 multicast VLAN must exist.
z A port can belong to only one IPv6 multicast VLAN.
Displaying and Maintaining IPv6 Multicast VLAN
To do… Use the command… Remarks
Display information about an IPv6
multicast VLAN display multicast-vlan ipv6
[ vlan-id ]
Available in any view