H3C Technologies H3C S3100 Series Switches User Manual
Page 796
1-10
Setting to output system information to a monitor terminal
Table 1-10 Set to output system information to a monitor terminal
Operation
Command
Description
Enter system view
system-view
—
Enable the information center
info-center enable
Optional
Enabled by default.
Enable system information
output to Telnet terminal or
dumb terminal
info-center monitor channel
{ channel-number | channel-name }
Optional
By default, a switch outputs
log/debugging/trap information to a
user terminal through information
channel 1.
Configure the output rules of
system information
info-center source { modu-name |
default } channel
{ channel-number | channel-name }
[ { log | trap | debug } { level
severity | state state } ]*
Optional
Refer to
for the default
output rules of system information.
Set the format of time stamp in
the output information
info-center timestamp { log | trap
| debugging } { boot | date | none }
Optional
By default, the time stamp format of
the log and trap output information is
date, and that of the debugging output
information is boot.
z
When there are multiple Telnet users or dumb terminal users, they share some configuration
parameters including module filter, language and severity level threshold. In this case, change to
any such parameter made by one user will also be reflected on all other user terminals.
z
To view debugging information of specific modules, you need to set the information type as debug
when setting the system information output rules, and enable debugging for corresponding
modules through the debugging command.
Enabling system information display on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the associated
display function in order to display the output information on the monitor terminal.
Table 1-11 Enable the display of system information on a monitor terminal
Operation
Command
Description
Enable the debugging/log/trap
information terminal display function
terminal monitor
Optional
Enabled by default
Enable debugging information terminal
display function
terminal debugging
Optional
Disabled by default
Enable log information terminal display
function
terminal logging
Optional
Enabled by default
Enable trap information terminal display
function
terminal trapping
Optional
Enabled by default