H3C Technologies H3C S3100 Series Switches - Manual (Page 80)

1-5
Displaying Device Configuration
After the above configuration, you can execute the display command in any view to display the current
and initial configurations of the device, so as to verify your configuration.
Table 1-5 Display Device Configuration
Operation Command Description
Display the initial configuration file saved
in the storage device display saved-configuration [ unit unit-id ]
[ by-linenum ]
Display the configuration file used for
this and next startup
display startup [ unit unit-id ]
Display the current VLAN configuration
of the device display current-configuration vlan
[ vlan-id ] [ by-linenum ]
Display the validated configuration in
current view
display this [ by-linenum ]
Display current configuration
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | exclude | include }
regular-expression ]
You can execute
the display
command in any
view.