beautypg.com

H3C Technologies H3C S3100 Series Switches User Manual

Page 166

background image

1-11

3) Adopting

dynamic

LACP aggregation mode

# Enable LACP on Ethernet1/0/1 through Ethernet1/0/3.

system-view

[Sysname] interface Ethernet1/0/1

[Sysname-Ethernet1/0/1] lacp enable

[Sysname-Ethernet1/0/1] quit

[Sysname] interface Ethernet1/0/2

[Sysname-Ethernet1/0/2] lacp enable

[Sysname-Ethernet1/0/2] quit

[Sysname] interface Ethernet1/0/3

[Sysname-Ethernet1/0/3] lacp enable

The three LACP-enabled ports can be aggregated into one dynamic aggregation group to implement

load sharing only when they have the same basic configuration (such as rate, duplex mode, and so on).

See also other documents in the category H3C Technologies Routers: