Remote boot rom and software loading, Remote loading using ftp, Loading procedure using ftp client – H3C Technologies H3C S3100 Series Switches User Manual
Page 817
1-11
When loading the Boot ROM and host software using FTP through BOOT menu, you are recommended
to use the PC directly connected to the device as FTP server to promote upgrading reliability.
Remote Boot ROM and Software Loading
If your terminal is not directly connected to the switch, you can telnet to the switch, and use FTP or
TFTP to load the Boot ROM and host software remotely.
Remote Loading Using FTP
Loading Procedure Using FTP Client
1) Loading the Boot ROM
As shown in
, a PC is used as both the configuration device and the FTP server. You can
telnet to the switch, and then execute the FTP commands to download the Boot ROM program
switch.btm from the remote FTP server (whose IP address is 10.1.1.1) to the switch.
Figure 1-8 Remote loading using FTP Client
Step 1: Download the program to the switch using FTP commands.
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(none):abc
331 Give me your password, please
Password:
230 Logged in successfully
[ftp] get switch.btm
[ftp] bye
When using different FTP server software on PC, different information will be output to the switch.
Step 2: Update the Boot ROM program on the switch.