H3C Technologies H3C S3100 Series Switches - Manual (Page 760)

1-3
To do… Use the command… Remarks
Execute the specified batch file execute filename
Optional
This command should be executed
in system view.
z For deleted files whose names are the same, only the latest deleted file is kept in the recycle bin
and can be restored.
z The files which are deleted by the delete command without the /unreserved keyword are actually
moved to the recycle bin and thus still take storage space. You can clear the recycle bin by using
the reset recycle-bin command.
z The dir /all command displays the files in the recycle bin in square brackets.
z If the configuration files are deleted, the switch adopts the null configuration when it starts up next
time.
Flash Memory Operations
Perform the following Flash memory operations using commands listed in Table 1-4 .
Perform the following configuration in user view.
Table 1-4 Operations on the Flash memory
To do… Use the command… Remarks
Format the Flash memory format device Required
Restore space on the Flash memory fixdisk device Required
The format operation leads to the loss of all files, including the configuration files, on the Flash memory
and is irretrievable.
Prompt Mode Configuration
You can set the prompt mode of the current file system to alert or quiet. In alert mode, the file system
will give a prompt for confirmation if you execute a command which may cause data loss, for example,
deleting or overwriting a file. In quiet mode, such prompt will not be displayed.
Table 1-5 Configuration on prompt mode of file system
To do… Use the command… Remarks
Enter system view system-view —