H3C Technologies H3C S3100 Series Switches User Manual

Page 756

1-43

When first-time authentication is not supported, you must first generate a DSA key pair on the server

and save the key pair in a file named Switch002, and then upload the file to the SSH client through FTP

or TFTP. For details, refer to the above part “Configure Switch B”.

# Import the public key pair named Switch002 from the file Switch002.

[SwitchA] public-key peer Switch002 import sshkey Switch002

# Specify the host public key pair name of the server.

[SwitchA] ssh client 10.165.87.136 assign publickey Switch002

# Establish the SSH connection to server 10.165.87.136.

[SwitchA] ssh2 10.165.87.136 identity-key dsa

Username: client001

Trying 10.165.87.136 ...

Press CTRL+K to abort

Connected to 10.165.87.136 ...

**************************************************************************

* Without the owner's prior written consent, *

* no decompiling or reverse-engineering shall be allowed. *

**************************************************************************